Z-Wave Plus MCO home Glass Touch Panel power Switch EU868.42MHz 4 gang ON/OFF power 4 relay switch MH-S314 lamp light control (White)
Z-Wave Plus Touch Panel Switch
The MH-S314 by MCO Home is a wall switch with 4 integrated switch relays for British standard wall boxes. The relays can be controlled both with the touch switches, which are integrated into the glass surface, and via Z-Wave commands. The relays can switch four loads with up to 1,100 watts each. Beside local switching the device can be used to control two groups of directly associated devices.
The wall switch can be easily connected to an electrical load without installing a flush mounted module separately. The relays are located inside a module which is directly connected to the glass touch button. With that MCO Home wall switch you can replace any switch insert or toggle switch. The wall switch can be mounted on any flush box.
This wall switch is made for British wall boxes and can’t therefore be used in German wall boxes
With the stylish glass wall switches by MCO Home you can easily integrate your already installed lights into your home automation network. Without installing any news cable, you can switch your lighting as usual via wall switch – but thanks to Z-Wave technology also via remote control, smartphone or sensor-controlled automation.
- Elegant designed glass panel with capactive touch buttons
- Easy for installation and stable in performance
- Wall switch with 4 integrated relays
Stylish glass touch switch with four buttons
- Ready-to-fit, incl. glass frame
- Replaces complete wall switch
- 4 Relays with up to 1,100W / 230VAC each
- Integrated status LED
- Enables Associations
- For 3-wire systems, neutral needed
- Flush-mounted in 86*86mm square junction box
- Power supply: 85~260VAC, 50/60Hz
- Max Load : 4x5A
Z-Wave frequency: 868.42MHz(EU)
Attention : The backlight of button is green&orange, not blue color !!!