Shopping Cart
Sunding Wireless Bluetooth Bike كمبيوتر ركوب الدراجات اللاسلكية - LE MARCHE UAE

Sunding Wireless Bluetooth Bike كمبيوتر ركوب الدراجات اللاسلكية

Dhs. 360.85


Multi-language settings (German, French, Dutch, Swedish, Spanish, Italian, English, Chinese)
Multifunctional Bicycle Computer

If you want to use Bluetooth,Please use phone download the JoycuneLite APP.
If you have any questions,Please refer to the manual or ask us.
Size: About 4.5*7.7*1.2cm/1.77*3.03*0.47(inch)
Display: LCD display
Power Supply:
CR2032 button batteries on the meter head*2
CR2032 cadence transmitter*1
CR2032 heart rate belt*1
1.Support for Bluetooth devices
2.Waterproof, But not recommended for prolonged exposure to rain
3.With automatic wake-up function
4.Dual battery compartment is more durable
5.Wireless, Big screen eight languages
2. Heart Rate Monitor*1
3.Combo Sensor*1
4. Crank Magnet*1
5.Wheel Magnet*1
6.Mounting Shoe*1
7.Wired Remote Control*1
8.Chest Belt*1
11.Battery CR2032*3
2.The minimum temperature
4.Total mileage
7.Single mileage
8.Mileage countdown
9.Current altitude
10.Average speed
11.Time countdown
12.Highest altitude
13.Maximum speed
14.Ride time
15.Total time
17.Maximum temperature
19.Cadence gear ratio
20.Maximum cadence
21.Average cadence
22.Maximum heart rate
23.Average heart rate
24.Maximum slope
25.Climbing height
26.Current air pressure
27.Minimum pressure

Dual Battery Compartment Lasts Longer

Corresponds To The Following Figure According To The Serial Number
① Multi-Language Settings
② Speed
③ Calories
④ Temperature
⑤ Bluetooth
⑥ Master And Slave Mode
⑦ Total Mileage
⑧ Clock
⑨ Maintenance Reminder
⑩ Wireless auto Wake

Corresponds To The Following Figure According To The Serial Number
① Computer
② Heart Rate Monitor
③ Combo Sensor
④ Crank Magnet
⑤ Wheel Magnet
⑥ Mounting Shoe
⑦ Wired Remote Control
⑧ Chest Belt
⑨ Ties
⑩ Instructions

Corresponds To The Following Figure According To The Serial Number
① Fasten the mount onto handlebar
② Install the bike computer on to mount
③ Tie the magnet onto spoke make it plane face to sensor
④ The induction distance between crank magnet and sensor should be ≤3mm
⑤ The induction distance between the wheel magnet and the sensor should be≤3mm

How to use the heart rate belt
1. Moisten the conductive pads on both sides of the heart rate belt with a small amount of water or conductive gel to make the heart rate belt closer to your skin.
2. Hold the heart rate belt around your chest and place it as close to the heart as possible to check if it is elastic enough to fit snugly
3. Adjust the chest strap to fit snugly under the chest muscles Below
4. The position of the transmitter on the heart belt will affect its performance. Please move it along the strap, make sure it is above your heart, and avoid the thick chest hair
5. After wearing the heart rate belt, in order to ensure the accuracy of the data, the heart rate signal will be collected for about 10 seconds, and then the heart rate data will be calculated.
6. In dry and cold weather, it may take several minutes for the heart rate belt to function properly. This is normal. Improve after a few minutes of exercise. Because the transmitter requires a small layer of sweat to increase contact with the skin

① Wet the sensing area on both sides before wearing
② When wearing, The logo is facing outwards, The logo is looking forward from the front, And cannot be inverted

Click to edit the product in Ali Orders.
Note: only show for shop owner